設計研發生產的磁力攪拌器性能優異，安全可靠.磁力攪拌器將隔離套與罐體改成可拆卸式，罐體聯接法蘭的焊接方式更能符合壓力容器標準的要求.方便于隔離套出現故鄣時的維護工作。隔離套與罐體法蘭的密封形式保證密封同時還保證了清洗無死角。 適用范圍：適用于各種不銹鋼反應罐、配液罐的攪拌裝置。
工況條件：易燃、易爆、易泄露、密封條件要求高的場合。
優特點：
1 用焊接隔離套靜態死封密取代動態機械密封，完全解決動態機械密封泄漏問題。
2 結構簡單，易拆御，易清洗，無死角。
3 底部裝置攪拌，在物料少的情況下可以攪拌，攪拌葉設計獨特，可以適應各種不同介質攪拌、混合。
——工作溫度：-30-200 ?? ——材質：304或316L ——工作壓力：0.09-0.8MPa ——選項型說明：必須了解介質粘度變化及密度變化，工作溫度，工作壓力 |
TNT-group magnetic stirrer designed, developed and produced has excellent performance, safety and reliability The magnetic stirrer changes the isolation sleeve and tank body to a detachable type, and the welding method of the tank body connecting flange can better meet the requirements of pressure vessel standards Convenient for maintenance work in case of malfunction of the isolation sleeve. The sealing form between the isolation sleeve and the tank flange ensures sealing while also ensuring no dead corners during cleaning. Scope of application:Suitable for mixing devices of various stainless steel reaction tanks and mixing tanks. Operating conditions:Places that are flammable, explosive, prone to leakage, and require high sealing conditions. Advantages:Replacing dynamic mechanical seals with static dead seals using welded isolation sleeves completely solves the problem of dynamic mechanical seal leakage.2. Simple structure, easy to disassemble, easy to clean, and no dead corners. The bottom device is used for stirring, which can be done in situations where there is a shortage of materials. The unique design of the stirring blades can adapt to the stirring and mixing of various media. |
衛生磁力攪拌器主要是為了制藥、生物工程及食品等行業進行GMP改造而設計的。性能優良，結構合理，體積小，使用可靠。磁力攪拌器主要有內磁鋼,外磁鋼，隔離套及傳動電機等部件組成.適用于各種不銹鋼反應罐、配液罐的攪拌裝置,ACJ型衛生磁力攪拌器接觸物料部分全部采用316L\304材料制造, 通過永磁聯軸器的工作原理來驅動攪拌軸運轉而工作。ACJ型磁力攪拌器用焊接隔離套靜態死密封取代動態機械密封，徹底解決了機封無法避免的跑，冒，滴之弊病。 攪拌葉輪旋轉產生了漩渦,將可溶解的粉體或液體吸入漩渦中并且被迅速的吸到攪拌葉輪.到了攪拌葉輪吸入方向隨著葉輪旋轉的離心力由葉輪外徑將不同介質以輻射的形式?jīng)_撞向罐壁.在沖撞到罐壁后液體隨著沖撞力及上升循環再被下吸回到葉輪的吸入端.在葉輪推力作用下不停的移動攪拌反應使得均質,混合.溶解,分散得以實現. |
The sanitary magnetic stirrer is mainly designed for GMP transformation in industries such as pharmaceuticals, biotechnology, and food. Excellent performance, reasonable structure, small size, and reliable use. The magnetic stirrer mainly consists of internal magnetic steel, external magnetic steel, isolation sleeve, and transmission motor components Suitable for various stainless steel reaction tanks and mixing tanks, the ACJ sanitary magnetic stirrer is made of 316L/304 material for the material contact part, and works by driving the stirring shaft through the working principle of permanent magnet coupling. The ACJ type magnetic stirrer replaces dynamic mechanical seals with welded isolation sleeves for static dead seals, completely solving the unavoidable problems of running, emitting, and dripping in mechanical seals. The rotation of the stirring impeller generates a vortex, which draws soluble powder or liquid into the vortex and quickly draws it into the stirring impeller When it comes to the suction direction of the stirring impeller, the centrifugal force generated by the rotation of the impeller collides different media in the form of radiation towards the tank wall through the outer diameter of the impeller After colliding with the tank wall, the liquid is sucked back down to the suction end of the impeller due to the collision force and upward circulation Under the thrust of the impeller, the continuous movement and stirring reaction result in homogenization and mixing Dissolution and dispersion can be achieved |
